Cellular Manufacturing...by HFA
 HFA can satisfy your "Cellular Manufacturing ", equipment needs !

 DRY GOODS

 

HFA just recently launched our "Dry Goods" category which includes our new DG-175 portable resin /dry goods bag with capacity for 385 lbs. of material.  We have also launched  gaylord and barrel covers.  Also, just introduced are our tapered mold chutes manufactured in two sizes. 

 

 

Cellular Manufacturing 

 "System Type I"

A common layout as shown, uses a standard 2210 and 2230 series flat belt and adjustable angle cleated belt conveyors.  Application: Press discharges parts on to an under the press conveyor with automatic reversing controls, where "Bad Shots" and or "Sample" shots are discharged on the non-operator side of the press.  "Good" shots are delivered out the control side to the horizontal to incline conveyor which then transfers parts onto a work table, feeder bowl...etc. Conveyors are sized for your application with many options available.

 


Lower your labor  costs today.

Ships in 2 Weeks

 Cellular Manufacturing  
 
"System Type II"

Another common layout as shown, utilizes a standard (DVR) or custom diverting chute,  a 2220 series cleated belt incline conveyor and a AS-36 auger separator for parts & molded runners.  Application: Press discharges parts into the supplied automatic diverter, "Bad" or "Sample" shots are discharged out the non-operator side, while "good" shots are discharged out the other side and into a cleated belt incline conveyor that delivers parts and runners to an automatic part runner separator. The separator is engineered to be right over the top of the press side granulator.  Runners in this case are smaller than the parts and the parts are conveyed out the end of the separator into an awaiting box set upon a pre-engineered and integrated shelf system. Conveyors, Diverters, and Auger Separators are sized for your application with many options available for all equipment. 


Lower your labor  costs today.

 Ships in 2 Weeks
 

  " Automated Manufacturing Cell"

 The automated cell as shown,  utilizes a standard U-Slide parts chute, a 2230 series horizontal to incline conveyor, an AS-36 auger separator, (2) 2220 series cleated belt conveyors and a In-Line box fill sytem by weigh scale.  Application: Press discharges parts into the supplied U-slide and are discharged out to the 2230 series horizontal to incline conveyor were parts and runners are discharged into the part/runner separator. The runners are larger and carry out the end of the auger and into a 2220 series cleated belt conveyor thereby carrying runners to regrind.  The parts pass through the gap set for the auger separator into another "metering" conveyor that delivers the parts to the in-line box fill system controlled weight scale measuring.  This system simply performs all functions in one manufacturing cell. 



Lower your labor  costs today.

 

Ships in 2 Weeks

These products are a simple, cost effective and are a high performance way to assist your organization in staying ahead of the competition. 
All Products shown are  In Stock NOW

Call us today!
Stephen Murphy
Mobile:(314)420-1464
Territory:
Southern Illinois/Eastern Missouri

St. Louis Office:

21 Forest Haven Court
O’Fallon, MO 63368
Rick White
  Mobile:(816) 289-1958
Territory:
  Kansas/Western Missouri
Corporate Office:
 2704 NE 78th Street, Kansas City, MO 64119
  T:(816)468-7577  F:(816)468-7555
  Pat Kelly
 Mobile:(712)830-4159
Territory:
Iowa/Nebraska
Iowa Office:
208 Bass
Carroll,  IA 51401