Slide helps you
make it clean
make it shine
and make it productive



Mold Cleaner Plus Degreaser III

NO METHYLENE CHLORIDE

  • No chlorofluorocarbons (CFC's)
  • No 1,1,1 Trichloroethane
  • Meets all current EPA and OSHA Regulations

Slide(R) Mold Cleaner Plus Degreaser III provides a convenient method for removal of silicones, grease, oil and wax build-up on mold surfaces, etc. without the need for wiping. Ideal for cold molds, it leaves no residue so it cleans without wiping. It has a fast evaporating formulation and is non-flammable, non-conductive and non-abrasive.
No. 45920
Net Wt. 20 oz. (16 fl. oz.).
No. 45901B 1-gallon size
No. 45905B 5-gallon size
No. 45955B 55-gallon drum

Resin Remover

The Stripper(R)

  • Removes resin build-up from polyacetals, urethanes and flame-retardant mold deposits
  • Removes most color deposits

Compounded with powerful solvents to remove resin build-up on molds. This build-up can be stripped without removal of mold (injection or transfer). Will remove, strip and/or aid in the removal of many resinous plastics. Mold off deposits with mold temperature above 180F. Discard next 3 to 4 shots. For flame-retardant resins - apply Slide mold release before attempting this procedure.
No. 41916T
Net Wt. 16 oz. (16 fl. oz.).
No. 41901B 1-gallon size
No. 41905B 5-gallon size
No. 41955B 55-gallon drum

On/Cycle
AT THE PRESS WARM/MOLD CLEANER

  • No chlorinated solvents
  • Will not stain aluminum
  • Multi-purpose cleaning as well as equipment cleaning
  • No caustic or acidic compounds
  • Use on ordinary soil stains and most painted surfaces

The ideal mold cleaner while in production. Works on warm molds up to 150F. Easily removes releases, oils, greases and many resinous build-ups before they can become a problem. Made from citrus oils which destroy odors and also give it a pleasant orange scent.
No. 44212
Net Wt. 12 oz. (16 fl. oz.).
No. 44201B 1-gallon size
No. 44205B 5-gallon size
No. 44255B 55-gallon drum

Econo-Spray(R) Mold Cleaner
APPROVED FOR INDIRECT FOOD CONTACT*

  • Food approved
  • No chlorinated chemicals
  • Very low odor

Mold cleaner quickly removes silicones, grease, oil and wax build-up on mold surfaces. It is also good for clean-up of non-operating electrical equipment and general degreasing on machinery. Safe on solvent-sensitive plastics.
No. 45612
Net Wt. 12 oz.
No. 45601B 1-gallon size
No. 45605B 5-gallon size
No. 45655B 55-gallon drum
*FDA Regulation 21 CFR 172.882, 172.884, 178.3530, 178.3650; 40 CFR 180.1001 (c) & (e)

Veri-Kleen 42012
CONTACT & METAL CLEANER

  • Will not harm rubber or paint, etc.
  • Excellent contact cleaner and flux remover
  • Ideal for circuit boards, tape heads, motors and a variety of metal cleaning applications
  • Non-flammable

It has a very mild odor. Can be used safely on operating electrical equipment, leaving no residue after evaporating.
No. 42012
Net Wt. 12 oz.

PC Polish Cleaner 43310
OLD YELLOW

  • Removes stains and mold deposits
  • Conditions your mold for faster startups and improved release properties
  • Protects as it cleans
  • Does not contain diamond dust
  • Particle size <5 microns
  • Handy plastic squeeze bottle

Use on all metal molds for removal of stains and discoloration. Can be used on cold or warm injection molds. Leaves a non-transferring, micron-thin film that reduces mold wear. Reduces the need for all types of internal and external release agents.
No. 43310 Case of 12

Silicone Remover 43016
CONCENTRATE FOR USE WITH WATER

  • Completely removes all traces of silicone

A specially formulated wetting agent to be mixed with water to remove silicone from molded plastic parts through repeated washing or by the use of an ultrasonic cleaning bath. It is designed to replace organic solvents that are harmful to certain plastics, such as polycarbonates, styrenes and acrylics.
No. 43016
Net Wt. 16 oz.

Bare Metal 45016
METAL CLEANER AND DEGREASER

  • Non-flammable and non-conductive
  • Leaves no residue
  • Contains no methylene chloride
  • Contains no 1,1,1 trichloroethane

Bare Metal is ideal for metal fabricators, tool and die operations, and anyone who needs to clean metal. It removes grease, oil, wax, tar and other contaminants on tools, motors, bearings, generators, control panels, power tools and more. Just spray and then wipe away the overflow, or simply allow it to dry. Bare Metal leaves no residue. Bare metal is ideal for removing silicones and other contaminants from mold surfaces.
No. 45016
Net Wt. 16 oz.

Plastic Cleaner 41515
With FOAMACTION(TM)

  • Just spray and wipe clean
  • No ozone depleting chemicals
  • Safe on all plastics
  • Cleans without leaving film or residue
  • Pleasant, fresh scent
  • Non-flammable, water-based cleaner with low VOC's
  • Contains no ammonia

Plastic Cleaner uses FOAMACTION(TM) foaming spray to effectively remove oil and dirt marks from all plastics, even sensitive polycarbonates. Just spray and wipe clean, then polish with a clean, dry cloth. Plastic Cleaner is idea for cleaning plastic parts, and helps remove mold releases prior to secondary operations. Plastic Cleaner also works as a general purpose cleaner and can be used to clean: safety gate doors and molding machine, tile and procelain, chrome, glass & mirrors, even metal (use one of Slide's rust preventatives to provide long-term protection on metal surfaces).
No. 41515
Net Wt. 15 oz. (16 fl. oz.).

Quick Mold Cleaner 40910
CLEANS QUICKLY WITHOUT WIPING

  • Contains no ozone depleting chemicals
  • Non-chlorinated
  • No methylene chloride
  • Recommended for use on molds at room temperature
  • No Chlorofluorocarbons (CFC's)
  • Extremely flammable

Quick Mold Cleaner effectively cleans molds at room temperature without wiping. It removes silicones, grease, oil and wax build-up on mold surfaces, etc. It leaves no residue, so it cleans without wiping. Its fast-evaporating formulation helps maximize the productivity of your operation.
No. 40910
Net Wt. 10 oz. (16 fl. oz.)

Mold & Metal Wipes
PRE-SATURATED CLEANING TOWELS

  • Quickly removes releases, grease, oil and more
  • Replaces hazardous cleaning solvents including 1,1,1 trichlorethane
  • Ideal for precision cleaning and routine maintenance
  • Dries quickly and has very mild fragrance

Fast, convenient, pre-saturated sheets quickly clean almost any surface*. Use for preparing molds for production or storage; touch-up cleaning during production; surface prep prior to secondary operations; and general maintenance and all-purpose cleaning. Using wipes reduces solvent consumption and VOC’s emissions.
*Pre-test on non-metal surfaces
No. 46370 canister of 70 wipes
No. 46301 Box of 50 single-wipe packets

NOTICE TO PURCHASER: User shall determine suitability of product for his intended use and assumes all risk and liability in connection herewith

Top of page