|
Mold Shield(R) 42916T
MEDIUM TERM "DRY" RUST PREVENTIVE
- Non-penetrating
- Will not bleed out and mark parts
- Neutralizes fingerprints
- Non-silicone
- Self-cleaning in start-up
- Seals out condensation
A unique rust preventive formulation. Designed, through a
special extra-dry spray package, to deliver a dry mist spray
which will not penetrate into moving mold parts, including
ejector pin holes, slides, cams, etc. This special feature
prevents marking of plastic parts when molds are put back in
service, where normally a conventional rust preventive may leach
out of mold crevices and mark parts, resulting in lost
production time and rejected parts. Protects up to two years
under normal conditions.
No. 42916T
Net Wt. 16 oz.
No. 42901B 1-gallon size
No. 42905B 5-gallon size
No. 42955B 55-gallon drum
No-Rust(R)
LONG TERM RUST PREVENTIVE
- Conforms to MIL-C-23411
- Non-silicone
- Neutralizes fingerprint acids
- Self cleaning
The one-step rust preventive that contains both neutralizer
and rust preventive. Ideal for plastic mold protection. Works on
stamping dies, stripper plates, jigs and fixtures, rubber mold
dies, die casting dies, precision instruments, machine tools and
machined or ground steel of all kinds. Guarantees positive
protection by displacing moisture from metal surfaces. Adheres
tightly. Accurate spray pattern concentrates protection in
normally inaccessible crevices. Protects up to five years under
normal conditions.
No. 40212
Net Wt. 12 oz. (12 fl. oz.).
No. 40201B 1-gallon size
No. 40205B 5-gallon size
No. 40255B 55-gallon drum
Acid Vapor Neutralizer
PROTECTION WHEN MOLDING PVC AND
FLAME-RETARDANT RESINS
- The one-step rust preventive
Formulated to protect plastic molding dies while in storage
from corrosive attack by hydrochloric and hydrobromic acids plus
protects molds from most common corrosive damage that is found
in the atmosphere. Protects against fingerprint acid. Acid
vapors produced during molding will be neutralized when they
come in contact with Acid Vapor Neutralizer. Length of
protection is dependent on amount of PVC and F/R being molded.
No. 44016T
Net Wt. 16 oz.
No. 44001B 1-gallon size
No. 44005B 5-gallon size
No. 44055B 55-gallon drum
Econo-Spray(R) Rust Preventive
WITH BLUE TRACING COLOR
- Conforms to MIL-C-23411
- Provides 3-year protection indoors
- Neutralizes fingerprints
- Self-healing
- Does not have to be removed before using molding dies
- Harmless blue color indicates coverage
Economical rust preventive quickly displaces moisture so you
can spray damp metal without drying before spraying. It helps
rust removal and is compatible with lubricating oil and greases.
No. 45512
Net Wt. 12 oz.
Econo-Spray Rust Preventive
No. 45501B 1-gallon size
No. 45505B 5-gallon size
No. 45555B 55-gallon drum
Penetrant Plus(R)
SHORT TERM RUST PREVENTIVE
- Conforms to MIL-C-23411
- Choice of spray or stream
- Dust free
- Non-staining
- Harmless to most plastics, rubber, paint, etc.
- Cleans and dries out electrical equipment
Mono-molecular penetrating film frees rust-frozen parts.
Lifts and replaces moisture with protective film. Lubricates
without affecting performance of electrical equipment.
Non-conductive because it has high dielectric strength and
lubricates delicate electronic equipment. Protects up to six
months under normal conditions.
No. 41812
Net Wt. 12 oz. (16 fl. oz.).
No. 41801B 1-gallon size
No. 41805B 5-gallon size
No. 41855B 55-gallon drum
NOTICE TO PURCHASER: User shall determine suitability of
product for his intended use and assumes all risk and liability
in connection herewith.
Top of page |
