Hardware and Accessories

This hardware and accessory section features many items which will allow you to customize your sensor design, replace lost or worn out hardware and connectors or simply up-date your existing system with the latest in sensor accessories.

 





Protection Tube Mounting Parts  

Sensor Mounting Fixed Fittings

Open Disc Terminal Blocks

Die Cast Aluminum Heads

Universal Series

Bakelite Series

Quick Disconnect Plugs and Jacks

Accessories for Standard Plugs and Jacks

 

 



Protection Tube Mounting Parts
TCA-122-101
TCA-122-102
For Ceramic Tubes FTG-148-101
FTG-148-102
Part Number Description
TCA-122-101 7/8-27 Threaded Ferrule for PPT-101- Porcelain or APT-101- Alumina tube
TCA-122-102 7/8-27 Threaded Ferrule for PPT-102- Porcelain or APT-102- Alumina tube
FTG-148-101 3/4" NPT x 1/2" NPT Brass reducing hex nipple for PPT-102- or APT-102- tube
FTG-148-102 3/4" NPT x 1/2" NPT Steel reducing hex nipple for PPT-102- or APT-102- tube
FLG-122-101
FLG-122-102
FLG-122-103
FTG-149-101
FTG-149-102
FTG-149-103
For Metal Tubes FTG-150-101
FTG-150-102
FTG-150-103
Part Number Description
FLG-122-101 15/16" I.D. x 3-1/2" Cast Iron Flange for 1/2" IPS
FLG-122-102 1-1/4" I.D. x 3-9/16" Cast Iron Flange for 3/4" IPS
FLG-122-103 1-7/16" I.D. x 3-11/16" Cast Iron Flange for 1" IPS
FTG-149-101 1/2" NPT x 1/2" NPT Malleable 90º Elbow
FTG-149-102 3/4" NPT x 3/4" NPT Malleable 90º Elbow
FTG-149-103 1" NPT x 1" NPT Malleable 90º Elbow
FTG-150-101 1/2" NPT x 1/2" NPT Universal Elbow
FTG-150-102 3/4" NPT x 3/4" NPT Universal Elbow
FTG-150-103 1" NPT x 1" NPT Universal Elbow

Sensor Mounting Fixed Fittings
Mounting fittings are sometimes necessary for the installation of thermocouple and RTD probes. The two basic types of fixed fittings are the Hex Bushing and the Hex Nipple, most commonly made of either Brass or Stainless Steel.
Hex Bushing Fixed fittings are brazed to the sheath of the probe; therefore the immersion length "U" must be specified in inches or mm. The immersion length is from the probe tip to the beginning of the thread on the fitting.
Sheath
Diameter
(in)		 Male
NPT		 Over-All
Length
(in)		 Hex
Across
Flats (in)		 Part Number
Brass Stainless Steel
1/16 1/8 3/4 7/16 FTG-159-101 FTG-162-101
1/4 1 9/16 FTG-159-102 FTG-162-102
1/2 1-1/4 7/8 FTG-159-103 FTG-162-103
1/8 1/8 3/4 7/16 FTG-159-104 FTG-162-104
1/4 1 9/16 FTG-159-105 FTG-162-105
1/2 1-1/4 7/8 FTG-159-106 FTG-162-106
3/16 1/8 3/4 7/16 FTG-159-107 FTG-162-107
1/4 1 9/16 FTG-159-108 FTG-162-108
1/2 1-1/4 7/8 FTG-159-109 FTG-162-109
1/4 1/8 3/4 7/16 FTG-159-110 FTG-162-110
1/4 1 9/16 FTG-159-111 FTG-162-111
1/2 1-1/4 7/8 FTG-159-112 FTG-162-112
5/16 1/4 1 9/16 FTG-159-113 FTG-162-113
1/2 1-1/4 7/8 FTG-159-114 FTG-162-114
3/8 1/4 1 9/16 FTG-159-115 FTG-162-115
1/2 1-1/4 7/8 FTG-159-116 FTG-162-116
Hex Nipple
Sheath
Diameter
(in)		 Male
NPT		 Over-All
Length
(in)		 Hex
Across
Flats (in)		 Part Number
Brass Stainless Steel
1/16 1/4 1-13/32 9/16 FTG-152-101 FTG-153-101
1/2 1-27/32 7/8 FTG-152-102 FTG-153-102
1/8 1/4 1-13/32 9/16 FTG-152-103 FTG-153-103
1/2 1-27/32 7/8 FTG-152-104 FTG-153-104
3/16 1/4 1-13/32 9/16 FTG-152-105 FTG-153-105
1/2 1-27/32 7/8 FTG-152-106 FTG-153-106
1/4 1/4 1-13/32 9/16 FTG-152-107 FTG-153-107
1/2 1-27/32 7/8 FTG-152-108 FTG-153-108
5/16 1/4 1-13/32 9/16 FTG-152-109 FTG-153-109
1/2 1-27/32 7/8 FTG-152-110 FTG-153-110
3/8 1/4 1-13/32 9/16 FTG-152-111 FTG-153-111
1/2 1-27/32 7/8 FTG-152-112 FTG-153-112

Compression Fittings		 There are non-adjustable and adjustable compression fittings. Non-adjustable compression fittings have a metal ferrule which is compressed onto the sheath and deformed permanently in the application; the fitting cannot be relocated along the sheath after tightening. Adjustable compression fittings have a Teflon® ferrule and the fitting can be relocated several times if immersion length is changed.
 MNPT Sheath
O.D.
(in)		 Part Number
Non-Adjustable
Brass		 Non-Adjustable
Stainless Steel		 Adjustable
Brass		 Adjustable
Stainless Steel
1/16 1/16 FTG-154-101 FTG-155-101 FTG-156-101 FTG-157-101
1/8 FTG-154-102 FTG-155-102 FTG-156-102 FTG-157-102
1/4 FTG-154-103 FTG-155-103 FTG-156-103 FTG-157-103
1/8 1/16 FTG-154-104 FTG-155-104 FTG-156-104 FTG-157-104
1/8 FTG-154-105 FTG-155-105 FTG-156-105 FTG-157-105
3/16 FTG-154-106 FTG-155-106 FTG-156-106 FTG-157-106
1/4 FTG-154-107 FTG-155-107 FTG-156-107 FTG-157-107
5/16 FTG-154-108 FTG-155-108 FTG-156-108 FTG-157-108
3/8 FTG-154-109 FTG-155-109 FTG-156-109 FTG-157-109
1/4 1/16 FTG-154-110 FTG-155-110 FTG-156-110 FTG-157-110
1/8 FTG-154-111 FTG-155-111 FTG-156-111 FTG-157-111
3/16 FTG-154-112 FTG-155-112 FTG-156-112 FTG-157-112
1/4 FTG-154-113 FTG-155-113 FTG-156-113 FTG-157-113
5/16 FTG-154-114 FTG-155-114 FTG-156-114 FTG-157-114
3/8 FTG-154-115 FTG-155-115 FTG-156-115 FTG-157-115
1/2 1/8 FTG-154-116 FTG-155-116 FTG-156-116 FTG-157-116
1/4 FTG-154-117 FTG-155-117 FTG-156-117 FTG-157-117
3/8 FTG-154-118 FTG-155-118 FTG-156-118 FTG-157-118

Spring Loaded
Hex Nipple		 Stainless steel 1/2" NPT x 1/2" NPT
 
Sheath
Diameter (in)		 Part
Number
1/8 FTG-158-101
3/16 FTG-158-102
1/4 FTG-158-103

Open Disc Terminal Blocks

The open disc terminal blocks are available for both single and dual element thermocouples or single-element RTD assemblies. They are available in two different materials. Ceramic discs are rated for 1000ºF (530ºC) and silicone/glass fiber discs are rated for 350ºF (117ºC). Silicone glass/fiber has a higher resistance to vibration and thermal shock than do the ceramic discs.
Each disc is assembled to a 1" O.D. x 1/8" thick Brass (standard) or optional stainless steel back-up plate by two screws, and the plate is directly brazed to the sensor sheath.

Ceramic Open Disc with Brass Back-Up Plate and Mounting Screws
Ceramic Disc for
Single Element

TCA-110-126		 Ceramic Disc for
Dual Elements

TCA-110-127		 Silicone/Glass Fiber for Single Element Only
TCA-110-128		 Ceramic Disc for
SIx Wire

TCA-110-129
Sheath
O.D.
(in)		 Approximate 
Dimensions
(in)		 Part Number Six wire
Approximate
Dimensions (in)
Single Element Dual Element Six wire Element
1/8 1-1/8 O.D. x 9/16 H TCH10045 TCH10048 TCH10051 2-1/32 O.D. x 9/16 H
3/16 1-1/8 O.D. x 9/16 H TCH10046 TCH10049 TCH10052 2-1/32 O.D. x 9/16 H
1/4 1-1/8 O.D. x 9/16 H TCH10047 TCH10050 TCH10053 2-1/32 O.D. x 9/16 H

 

Ceramic Open Disc with Stainless Steel Back-Up Plate and Mounting Screws
Sheath
O.D.
(in)		 Approximate 
Dimensions
(in)		 Part Number Six wire
Approximate
Dimensions (in)
Single Element Dual Element Six wire Element
1/8 1-1/8 O.D. x 9/16 H TCH10054 TCH10057 TCH10060 2-1/32 O.D. x 9/16 H
3/16 1-1/8 O.D. x 9/16 H TCH10055 TCH10058 TCH10061 2-1/32 O.D. x 9/16 H
1/4 1-1/8 O.D. x 9/16 H TCH10056 TCH10059 TCH10062 2-1/32 O.D. x 9/16 H

Silicone/Glass Fiber Open Disc with Brass Back-Up Plate and Mounting Screws
Sheath
O.D.
(in)		 Approximate 
Dimensions
(in)		 Part Number
Single Element Dual Element
1/8 1" O.D. x 9/16 H TCH10063 n/a
3/16 1" O.D. x 9/16 H TCH10064 n/a
1/4 1" O.D. x 9/16 H TCH10065 n/a

Silicone/Glass Fiber Open Disc with Stainless Steel Back-Up Plate and Mounting Screws
Sheath
O.D.
|(in)		 Approximate 
Dimensions
(in)		 Part Number
Single Element Dual Element
1/8 1" O.D. x 9/16 H TCH10066 n/a
3/16 1" O.D. x 9/16 H TCH10067 n/a
1/4 1" O.D. x 9/16 H TCH10068 n/a


Die Cast Aluminum Heads

· Plated chain attaches cover to body
 · Body is "O" Ring gasketed
 · Available in Single (2 wire) or Duplex (4 wire)
 · Comes in three sizes--Standard, Medium and Miniature to allow for design flexibility
 · Has grommeted conduit entry for lead wire or flexible cable


3-1/2"H x 4"L x 3-1/4"W
Single Terminal Block
P/N: TCA-116-101
Duplex Terminal Block
P/N: TCA-116-102
Standard Size Head
Sensor
Opening
(FNPT)		 Conduit
Opening
(FNPT)		 Part Number
Head
Only		 Head with
Single		 *CODE Head with
Duplex		 *CODE
3/4" 1/2" TCA-110-104 TCH10001 01 TCH10003 03
1/2" 1/2" TCA-110-105 TCH10002 02 TCH10004 04
*CODE Number indicates Head Style to be inserted in Part Number for thermocouple and RTD Assemblies
 


3-1/2"H x 3-3/4"L x 2-5/8"W

 Single Terminal Block
P/N: TCA-116-103		 Duplex Terminal Block
P/N: TCA-116-104
Medium Die Cast Aluminum Head
Sensor
Opening
(FNPT)		 Conduit
Opening
(FNPT)		 Part Number
Head
Only		 Head with
Single		 *CODE Head with
Duplex		 *CODE
1/2" 3/8" TCA-110-106 TCH10005 05 TCH10008 08
3/8" 3/8" TCA-110-107 TCH10006 06 TCH10009 09
1/4" 3/8" TCA-110-108 TCH10007 07 TCH10010 10
*CODE Number indicates Head Style to be inserted in Part Number for thermocouple and RTD Assemblies
 


2-5/8"H x 3"L x 2-5/16"W

 Single Terminal Block
P/N TCA-116-105		 Duplex Terminal Block
P/N TCA-116-106
Miniature Die Cast Aluminum Head
Sensor
Opening
(FNPT)		 Conduit
Opening
(FNPT)		 Part Number
Head
Only		 Head with
Single		 *CODE Head with
Duplex		 *CODE
1/2" 3/8" TCA-110-109 TCH10011 11 TCH10014 14
3/8" 3/8" TCA-110-110 TCH10012 12 TCH10015 15
1/4" 3/8" TCA-110-111 TCH10013 13 TCH10016 16
*CODE Number indicates Head Style to be inserted in Part Number for
thermocouple and RTD Assemblies


Universal Series

· Designed for heavy process and industrial applications
 · Available in Cast Iron or Cast Aluminum
 · Single or Duplex, high temperature terminal blocks
will accept up to 8 gauge wire
 · Terminal blocks are provided with a 3/32" diameter access hole
to allow checking of the working thermocouple with
an external 1/16" diameter thermocouple
Single Terminal Block
P/N TCA-116-109		 Duplex Terminal Block
P/N TCA-116-110
Universal Series

Approximate 
Assembled Dimensions
4"H x 4" x 3-1/2"W

 
Material Sensor
Opening
(FNPT)		 Conduit
Opening
(FNPT)		 Part Number
Head
Only		 Head with
Single		 *CODE Head with
Duplex		 *CODE
Cast
Iron		 1" 3/4" TCA-110-112 TCH10017 17 TCH10020 20
3/4" 3/4" TCA-110-113 TCH10018 18 TCH10021 21
1/2" 3/4" TCA-110-114 TCH10019 19 TCH10022 22
1" 1/2" TCA-110-115 TCH10023 23 TCH10026 26
3/4" 1/2" TCA-110-116 TCH10024 24 TCH10027 27
1/2" 1/2" TCA-110-117 TCH10025 25 TCH10028 28
Cast
Aluminum		 1" 3/4" TCA-110-118 TCH10029 29 TCH10032 32
3/4" 3/4" TCA-110-119 TCH10030 30 TCH10033 33
1/2" 3/4" TCA-110-120 TCH10031 31 TCH10034 34
1" 1/2" TCA-110-121 TCH10035 35 TCH10038 38
3/4" 1/2" TCA-110-122 TCH10036 36 TCH10039 39
1/2" 1/2" TCA-110-123 TCH10037 37 TCH10040 40
*CODE Number indicates Head Style to be inserted in Part Number for thermocouple and RTD Assemblies
 

Bakelite Series

· Lightweight
 · Non-combustible, Acid and Alkali resistant body
 · Maximum service temperature of 662ºF (350ºC)
 · Plated chain attaches cover to body
 · Body is "O" Ring gasketed
 · Available in Single (2 wire) or Duplex (4 wire)
 · Has grommeted conduit entry for lead wire or flexible cable
 · Available in two sizes: Standard and Small


 Approximate Size: 
3-7/8"H x 4-1/8"L x 3-3/16"W

 Bakelite
Single Terminal Block
P/N TCA-116-111		 Bakelite
Duplex Terminal Block
P/N TCA-116-112
Standard Size Bakelite Head
Sensor
Opening
(FNPT)		 Conduit
Opening
(FNPT)		 Part Number
Head
Only		 Head with
Single		 *CODE Head with
Duplex		 *CODE
1/2" 1/2" TCA-110-124 TCH10041 41 TCH10042 42
*CODE Number indicates Head Style to be inserted in Part Number for thermocouple and RTD Assemblies


Approximate Size: 
2-5/8"H x 3"L x 2-5/16"W

 Bakelite
Single Terminal Block
P/N TCA-116-113		 Bakelite
Duplex Terminal Block
P/N TCA-116-114
Miniature Size Bakelite Head
Sensor
Opening
(FNPT)		 Conduit
Opening
(FNPT)		 Part Number
Head
Only		 Head with
Single		 *CODE Head with
Duplex		 *CODE
1/4" 3/8" TCA-110-125 TCH10043 43 TCH10044 44
*CODE Number indicates Head Style to be inserted in Part Number for thermocouple and RTD Assemblies
 

 

Quick Disconnect Plugs and Jacks

Standard | Standard High Temperature | Miniature Quick Disconnect Plugs and Jacks

3-Pin Quick Disconnect Plugs and Jacks

 
Standard Quick Disconnect Plugs and Jacks

Hollow Pin Plug
Solid Pin Plug
Jack

· Quick, positive connections
 · Bodies are ANSI color coded, glass filled nylon with a temperature rating of 350ºF (177ºC) continuous and 400ºF (204ºC) intermittent
 · Pins are made from matching thermocouple material except R and S which are compensated
 · Plugs available in hollow or solid pins
 · Plugs and Jacks are interchangeable with other thermocouple connectors with standard 7/16-inch spacing
 · Can be imprinted with customer's own name (minimum order and tooling charge applies).

ANSI
Calibration		 Body 
Color		 Part Number
Hollow Pin Plug Solid Pin Plug Jack
J Black TCA-101-101 TCA-101-111 TCA-102-101
K Yellow TCA-101-102 TCA-101-112 TCA-102-102
T Blue  TCA-101-103 TCA-101-113 TCA-102-103
E Purple TCA-101-107 TCA-101-114 TCA-102-107
N Orange TCA-101-108 TCA-101-115 TCA-102-108
R/S Green TCA-101-109 TCA-101-116 TCA-102-109
Cu White TCA-101-110 TCA-101-117 TCA-102-110

High Temperature Standard Quick Disconnect Plugs and Jacks

· All of the same features as the standard Plugs and Jacks except body color comes in "Brown" only
 · Temperature rating of 500ºF (260ºC) continuous and 550ºF (288ºC) intermittent

ANSI
Calibration		 Body 
Color		 Part Number
Hollow Pin Plug Solid Pin Plug Jack
J Brown TCA-101-118 TCA-101-125 TCA-102-111
K Brown TCA-101-119 TCA-101-126 TCA-102-112
T Brown TCA-101-120 TCA-101-127 TCA-102-113
E Brown TCA-101-121 TCA-101-128 TCA-102-114
N Brown TCA-101-122 TCA-101-129 TCA-102-115
R/S Brown TCA-101-123 TCA-101-130 TCA-102-116
Cu Brown TCA-101-124 TCA-101-131 TCA-102-117

Miniature Quick Disconnect Plugs and Jacks


Plug--Male
Jack--Female

· Designed for light weight and to be space-saving
 · Bodies are ANSI color coded, glass filled nylon with a temperature rating of 350ºF (177ºC) continuous and 400ºF (204ºC) intermittent
 · Pins are made from matching thermocouple material except R and S which are compensated
 · Plugs and Jacks are interchangeable with other miniature connectors
 · Will accept wire from .001" to .032" and sheath diameters from .010" to .188"
 · Negative pin marked with red disc
 · Complements modern miniature instrumentation

ANSI
Calibration		 Body 
Color		 Part Number
Plug Jack
J Black TCA-101-105 TCA-102-118
K Yellow TCA-101-104 TCA-102-119
T Blue TCA-101-132 TCA-102-120
E Purple TCA-101-133 TCA-102-121
N Orange TCA-101-134 TCA-102-122
R/S Green TCA-101-135 TCA-102-123
Cu White TCA-101-136 TCA-102-124

3-Pin Quick Disconnect Plugs and Jacks


Plug--Male
Jack--Female
Plug--Male
Jack--Female

Standard
· Standard 3-Pin Plugs and Jacks accept all accessories of the standard 2-Pin Plug and Jack except the spool type brazing adaptor and neoprene boot
 · 3-Pin Plug is available with all three pins being solid or with the two thermocouple pins being hollow
 · Has all the same features as the standard 2-Pin Plug and Jack

ANSI
Calibration		 Body 
Color		 Part Number
Hollow Pin Plug Solid Pin Plug Jack
J Black TCA-101-137 TCA-101-143 TCA-102-125
K Yellow TCA-101-138 TCA-101-144 TCA-102-126
T Blue TCA-101-139 TCA-101-145 TCA-102-127
E Purple TCA-101-140 TCA-101-146 TCA-102-128
R/S Green TCA-101-141 TCA-101-147 TCA-102-129
Cu White TCA-101-142 TCA-101-148 TCA-102-130

Miniature
 · Has all the same standard features as the 2-Pin miniature Plug and Jack
 · The miniature 3-Pin Plugs and Jacks will accept all accessories of the 2-Pin Plugs and Jacks except the cable clamp and neoprene boot

ANSI
Calibration		 Body Part Number
Color Plug Jack
J Black TCA-101-149 TCA-102-131
K Yellow TCA-101-150 TCA-102-132
T Blue TCA-101-151 TCA-102-133
E Purple TCA-101-152 TCA-102-134
R/S Green TCA-101-153 TCA-102-135
Cu White TCA-101-154 TCA-102-136


Accessories for Standard Plugs and Jacks

Cable Clamps
For 3/8" Diameter sheath or 1/4" armor cable
 Cable Clamp
(Part Number TCA-107-102)-($)


For Lead wire with or without Braid
 Cable Clamp
(Part Number TCA-107-101-($)
Neoprene Grommet
(Part Number TCA-109-102)-($)

Compression Type Tube Adaptors
· Can be used with TEMPCO-PAK or
· Tubing Both types have Brass Ferrules


Standard Tube Adaptors
Affords higher degree of stability to Plug or Jack

Sheath
Diameter		 Part
Number
.040" TCA-103-106
.063" TCA-103-102
.125" TCA-103-101
.188" TCA-103-103
.250" TCA-103-104
.313" TCA-103-107
.375" TCA-103-108


Insert Tube Adaptor
Secured by slots in body of the Plug or Jack (2-Pin or 3-Pin)

Sheath
Diameter		 Part
Number
.040" TCA-103-109
.063" TCA-103-110
.125" TCA-103-111

Neoprene Boots for Standard Plug and Jack

· Made of Flexible Neoprene
·  Sized to cover standard connectors even with accessories (such as Cable Clamps and Tube Adaptors)
· 3/32" Wire Entrance
· Order 2 per Assembly
· For 2-Pin Connections only
(Part Number TCA-121-101)-($)

Dual Tube Adaptors

· Assemble Standard Connectors into Dual Connectors
· For adjacent TEMPCO-PAK
· Has Brass Ferrule
· Use 2-Pin Connectors only

Sheath 
Diameter		 Part 
Number
.063" TCA-103-112
.125" TCA-103-113
.188" TCA-103-114
.250" TCA-103-115
.313" TCA-103-116
.375" TCA-103-117

Dual Cable Clamps

· Assemble Standard Connectors into Dual Connectors
· Accommodate either One or Two Lead-In Cables
· Use 2-Pin Connectors only
(Part Number: TCA-107-103)-($)

Cable Clamps and Grommets

· For 2-Pin Miniatures only
 Cable Clamp 
(Part Number TCA-107-105)
Neoprene Grommet 
(Part Number TCA-109-102)

Mini Insert Tube Adaptor

· Secured by slots in body of the Plug or Jack (2-pin or 3-Pin)
· Compression Fitting has Brass Ferrules
· Can be used with TEMPCO-PAK or Tubing
· For all Miniature Connectors only

Sheath 
Diameter		 Part 
Number
(in) (mm)
.040 1.00 TCA-103-118
.063 1.60 TCA-103-119
.125 3.17 TCA-103-120

Neoprene Boot for Miniature Plug and Jack

· Made of Flexible Neoprene
· Sized to cover miniature connectors even with accessories (such as Cable Clamps and Tube Adaptors)
· 3/32" Wire Entrance
· Order 2 per Assembly
· For 2-Pin Connections only
(Part Number: TCA-121-102)-($)

Neoprene Wire Entrance Grommets,
Nylon Wire Protection Washers

Grommets used in place of Cable Clamp.
(Part Number TCA-109-103)-($)
Washer protects fine wire from breakage.
(Part Number TCA-120-101)-($)

Brass Crimping Inserts
Used Primarily with TEMPCO-PAK

Sheath Diameter Part Number
Undrilled TCA-112-101
.020" (0.5 mm) TCA-112-102
.040" (1.0 mm) TCA-112-103
.063" (1.6 mm) TCA-112-104
.125" (3.17 mm) TCA-112-105
.188" (4.77 mm) TCA-112-106
.250" (6.35 mm) TCA-112-107
.118" (3.0 mm) TCA-112-108
.177" (4.5 mm) TCA-112-109
.236" (6.0 mm) TCA-112-110

Brass Brazing Inserts
Can be used with Tubing or TEMPCO-PAK

Sheath Diameter Part Number
Undrilled TCA-113-101
.020" (0.5 mm) TCA-113-102
.040" (1.0 mm) TCA-113-103
.063" (1.6 mm) TCA-113-104
.125" (3.17 mm) TCA-113-105
.188" (4.77 mm) TCA-113-106
.250" (6.35 mm) TCA-113-107
.236" (6.0 mm) TCA-113-108

Stainless Steel Spool-Type Brazing Adaptors

· Provides maximum rigidity to Plug or Jack
· For 2-Pin connectors only

Sheath
Diameter		 Part
Number
Undrilled TCA-113-109
.063" TCA-113-110
.125" TCA-113-111
.188" TCA-113-112
.250" TCA-113-113
.313" TCA-113-114
.375" TCA-113-115

Filler Plate Set
· When combined with Dual Tube Adaptor or Dual Cable Clamp, the Filler Plate Set provides the 3/4" pin spacing of a single Duplex Connector
(Part Number: TCA-107-104)-($)

Neoprene Wire Entrance Grommets
Nylon Wire Protection Washers

· For all Miniature Connectors
· Grommet is used in place of cable clamp
· Washer protects fine wire from breakage
 Grommet
(Part Number TCA-109-104)-($)
Washer
(Part Number TCA-120-102)-($)

Crimping Inserts

· For all Miniature Connectors
· Used primarily with TEMPCO-PAK

Sheath 
Diameter		 Part 
Number
(in) (mm)
Undrilled TCA-112-111
.020 .50 TCA-112-112
.040 1.00 TCA-112-113
.063 1.60 TCA-112-114
.125 3.17 TCA-112-115
.188 4.77 TCA-112-116

Brazing Inserts
· For all Miniature Connectors
· Can be used with Tubing or TEMPCO-PAK

Sheath 
Diameter		 Part 
Number
(in) (mm)
Undrilled TCA-113-116
.020 .50 TCA-113-117
.040 1.00 TCA-113-118
.063 1.60 TCA-113-119
.125 3.17 TCA-113-120
.188 4.77 TCA-113-121