Tempco's Jack Panels are made from rugged, .090" thick aluminum and allow for easy installation of multi-circuit thermocouple or RTD Quick Disconnect Jacks in your panel or housing. Panels can be manufactured with either a single calibration type or a mixed variety.

• Thermocouple Connectors

• 3-pin Connectors

• Jab-In Style Termination

• Rack Panels/FS Box

• Selector Switches/Std. &
  Circular Panel Jacks

Accepts standard plugs.
Jacks are ANSI color coded, glass filled nylon with a maximum service temperature of 400ºF (204ºC).
Panels are manufactured from rugged, .090" thick aluminum.
Brushed and anodized finishes are available at an additional cost. Consult TEMPCO with your requirements.
Panels are normally supplied unassembled with
all necessary hardware to assemble and install included. Can be furnished assembled at an additional cost.

Standard Sizes

5" Bezel Jack Panel for Standard Thermocouple Connectors

¤ Insert calibration code in Part Number (J, K, T, E, R, S, U, N)

For Miniature Thermocouple Connectors

¤ Insert calibration code in Part Number (J, K, T, E, R, S, U)

Jack Panels for 3-pin Connectors

For Standard 3-pin Connectors

 For use with RTD's and shielded thermocouples requiring 3 wires.
 Will accept standard 3-Pin connectors.
 Jack bodies are ANSI color coded, glass filled nylon with a maximum service temperature of 400ºF (204ºC).
 Panels are manufactured of rugged .090" thick aluminum.
 Brushed and anodized finishes are available at an additional cost. Consult TEMPCO with your requirements.
 Panels are supplied unassembled for ease of wiring--all hardware to assemble is included.

For Miniature 3-Pin Connectors

For use with RTD's and shielded thermocouples requiring 3 wires.   Complements modern miniature instrumentation.   Jack bodies are ANSI color coded, glass filled nylon with a maximum service temperature of 400ºF (204ºC).   Panels are manufactured of rugged .090" thick aluminum.   Brushed and anodized finishes are available at an additional cost. Consult TEMPCO with your requirements.   Panels are supplied unassembled for ease of wiring--all hardware to assemble is included.

Part
Number

Number
of
Rows

Panel
Height
H x L (in)

Number
of
Jacks

Cutout
Size
H x L (in)

JP(¤)00029

1

2-15/16 x 4-3/4

6

1-9/16 x 4-5/32

JP(¤)00030

2

4-15/16 x 4-3/4

12

3-9/16 x 4-5/32

JP(¤)00031

3

6-15/16 x 4-3/4

18

5-9/16 x 4-5/32

JP(¤)00032

4

8-15/16 x 4-3/4

24

7-9/16 x 4-5/32

JP(¤)00033

1

2-15/16 x 9

12

1-9/16 x 8-15/32

JP(¤)00034

2

4-15/16 x 9

24

3-9/16 x 8-15/32

JP(¤)00035

3

6-15/16 x 9

36

5-9/16 x 8-15/32

JP(¤)00036

4

8-15/16 x 9

48

7-9/16 x 8-15/32

¤ Insert calibration code in Part Number (J, K, T, E, R, S, U)
Mounting Hole Spacing: 3/16" in from each side to center of 13/64" hole (for #10 screw).

 Available in 6 to 36 positions  2-Pole and 3-Pole circuits with "OFF" position  Silver plated blades and contacts with self-cleaning wiper action and low contact resistance  Terminals are silver plated brass with numbered circuits and polarity identification  "OFF" position has terminals available for shorting input circuit when using it with a digital meter (Not available on 3-Pole)  High impact GE noryl™ case
 

Panel Mount Standard Jab-In Jack

Custom Made 19" Rack Panels

Standard Features

 Panels are made of .090" thick aluminum with a smooth mill finish.
 All panels have slotted holes positioned at E.I.A. standard spacing.
 Panels are available with any of the standard or miniature Panel Jacks shown in this section.
 Rack Panels come in standard heights of 3-1/2", 5-1/4", 7", and 8-1/4".
 Panels are supplied unassembled for ease of wiring--all hardware to assemble is included.

Jab-In Style Termination

Accepts Standard Plugs.
 Jacks will accept up to 14 gauge wire.
 Jack bodies are ANSI color coded, glass filled nylon with a maximum service temperature of 400ºF (204ºC).
 Panels are manufactured of rugged .090" thick aluminum.
 Brushed and anodized finishes are available at an additional cost. Consult TEMPCO with your requirements.
 Jack rows are placed further apart than standard Jack Panels for ease of termination.
 Panels are supplied unassembled for ease of wiring--all hardware to assemble is included.

Standard Sizes

Part
Number

Number
of
Rows

Panel
Height
H x L (in)

Number
of
Jacks

Cutout
Size
H x L (in)

JP(¤)00037

1

3-1/2 x 5-1/2

6

1-7/8 x 4-21/32

JP(¤)00038

2

5-3/16 x 5-1/2

12

3-9/16 x 4-21/32

JP(¤)00039

3

8-1/8 x 5-1/2

18

6-1/2 x 4-21/32

JP(¤)00040

1

3-1/2 x 10

12

1-7/8 x 9-1/4

JP(¤)00041

2

5-3/16 x 10

24

3-9/16 x 9-1/4

JP(¤)00042

3

8-1/8 x 10

36

6-1/2 x 9-1/4

¤ Insert calibration code in Part Number (J, K, T, E, R, S, U)