Style T7 Connection Head with 1/2" NPT Pipe Nipple

"L2"

"L1"
Design Features
* Tempco's connection heads are gasketed to seal against moisture, dust and corrosive or hostile atmospheres.
* Screw covers are attached to body with a plated chain.
* Covers have lugs for tightening or loosening with a screwdriver or wrench.
* Available in single (2 wire) or duplex (4 wire)
* Tempco's connection heads are available in die cast aluminum, bakelite and cast iron in a variety of sizes from miniature for confined areas to the large universal head designed for heavy process and industrial applications.

 

How To Order
Thermocouples are offered with the options listed in the worksheet below. Create an ordering code by filing in the boxes with the appropriate number and/or letter designation for your requirements, and a part number will be assigned.

Please contact Thermal Tech Equipment  for further assistance.

Toll Free (800) 444-2770

 

  1 2 3 4 5 6 7 8 9 10 11
T 7                            
Design Style                    
Calibration Code BOX 1
ANSI Standard
Tolerances		 J K E T N R S B
Special Tolerances 3 4 5 6 7 8 per
IPTS-68 		 9 per
IPTS-68		  
Number of Conductors BOX 2
2 = Standard for Single Thermocouple
4 = Duplex T/C
Insulation BOX 3
M = 94% Min. MgO
H = 99.4% Min. MgO
A = 99.6% Alumina
Sheath Material BOX 4
A = Alloy 600
B = 304 SS
C = 316 SS
Sheath O.D. BOX 5
D = .063" ±.001
F = .125" ±.002
G = .188" ±.002
H = .250" +.003/-.002
J = .313" +.003/-.002
K = .375" +.003/-.002		 P = 2.0 mm ±.03
Q = 3.0 mm ±.03
R = 4.5 mm ±.05
S = 6.0 mm +.07/-.05
Sheath Length "L" BOX 6
Whole inches 01 to 99
Lengths over 99 in. consult TEMPCO
Junction BOX 7
  Grounded Ungrounded Exposed
Single G U E
Dual, common 4 5 6
Dual, isolated -- 7 8
Connection Head BOX 8
Select style from connection head selection s and enter code number here.
"L2" 1/2" NPT Nipple Length BOX 9

Whole inches 03 to 18
Lengths over 18 in. consult TEMPCO
Spring Loaded Terminal Block BOX 10

"O" if not required
"Y" if required
Special Requirements BOX 11
If none, enter "0"
If others required, consult TEMPCO